Product overview: Fluke 725 Multifunction Process Calibrator
With the Fluke 725 Multifunction Process Calibrator you can easily source and measure almost any process parameter and test almost any process device. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
From the moment you pick it up, the Fluke 725 is ready to perform as a powerful, yet easy-to-use field calibrator. Its simple controls, without menus, make operation easy and the backlit display provides better visibility in poor light. It features a small, streamline shape and a rugged, reliable design that make it ideal for standing up to harsh field conditions.
Key features
|
Specifications |
||
|
Ramp functions |
Source functions |
Voltage, current, resistance,
frequency, temperature |
|
|
Ramps |
Slow ramp, Fast ramp, 25% step-ramp |
|
Loop power function |
Voltage |
24 V |
|
|
Accuracy |
10% |
|
|
Maximum current |
22 mA, short circuit protected |
|
Step functions |
Source functions |
Voltage, current, resistance,
frequency, temperature |
|
|
Steps |
25% of range, 100% of range |
|
Environmental Specifications |
|
|
Operating temperature |
-10°C to +55°C |
|
Storage temperature |
-20°C to 71°C |
|
Operating altitude |
3000 m |
|
Safety Specifications |
|
|
Agency approvals |
EN 61010-1:1993, ANSI/ISA
S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 |
|
Mechanical and General Specifications |
|
|
Size |
130 x 236 x 61 mm |
|
Weight |
0.65 kg |
|
Batteries |
4 AA alkaline batteries |
|
Battery replacement |
Separate battery compartment,
accessable without breaking calibration seal |
|
Side port connections |
Pressure module connector, also used
for remote real-time programming |
Models: Fluke 725 Multifunction Process Calibrator
Includes:
